Data sheet

I/O Systems - S800 I/O

Freelance hardware selector

S800 I/O is a comprehensive, distributed and modular process I/O system that communicates with parent controllers over industry-standard fieldbus technology and therefore can be used with a wide range of process controllers from ABB and other vendors.

By permitting installation in the field, close to sensors and actuators, S800 I/O reduces the installation cost by reducing
the cost of cabling. And thanks to features such as “hot swap” of modules, “online” reconfiguration, and redundancy options,
it contributes to keeping production – and thereby profits – up.

For updated information regarding System 800xA please visit our 800xA Hardware Selector. In the HW-selector, you
can compare different communication modules, AC 800M controllers, S800 I/O modules, S900 I/O modules, Select I/O modules, module termination units, network equipment, panels, power supplies, and voters, and also print your PDF files or save an outline of all modules in the product area.

Below is an outline of the range of different S800 I/O modules available.
Specific feature ¹ AI801 AI810 AI815 AI820
General info
Article number 3BSE020512R1 3BSE008516R1 3BSE052604R1 3BSE008544R1
Type Analog Input
Signal specification 0...20 mA, 4...20 mA 0..20mA, 4..20mA, 0..10V, 2..10V 0..20 mA, 4..20 mA, 0..5 V, 1..5 V -20..+20 mA, 0(4)..20 mA, -10..+10 V, 0(2)..10 V
Number of channels 8 4
Signal type Unipolar single ended Bipolar differential
HART No Yes No
SOE No
Redundancy No
High integrity No
Intrinsic safety No
Mechanics S800L S800
Dimensions
Width 86.1 mm (3.4”) 45 mm (1.77”)
Depth 58.5 mm (2.3”) 102 mm (4.01”), 111 mm (4.37”) including connector
Height 110 mm (4.33”) 119 mm (4.7”)
Weight 0.24 kg (0.53 lbs.) 0.2 kg (0.44 lbs.) 0.23 kg (0.51 lbs.) 0.2 kg (0.44 lbs.)
Environment and certification
RoHS compliance DIRECTIVE/2011/65/EU (EN 50581:2012)
WEEE compliance DIRECTIVE/2012/19/EU
¹ For detailed information on each module, please visit: freelancehardwareselector.automation.abb.com
Specific feature ¹ AI825 AI830A AI835A AI843
General info
Article number 3BSE036456R1 3BSE040662R1 3BSE051306R1 3BSE028925R1
Type Analog Input
Signal specification -20..+20 mA, 0(4)..20 mA, -10..+10 V, 0(2)..10V 3-wire RTD: Pt100, Cu10, NI100, Ni120 and resistive potentiometer -30..75 mV linear; TC types B, C, D, E, J, K, L, N, R, S, T and U -30..75 mVlinear, TC types B, C, E, J, K, L, N, R, S, T and U
Number of channels 4 8
Signal type See table in S800 Modules and Termination Units, 3BSE020924 See table
HART No
SOE No
Redundancy No Yes
High integrity No
Intrinsic safety No
Mechanics S800
Dimensions
Width 45 mm (1.77”)
Depth 102 mm (4.01”), 111 mm (4.37”) including connector
Height 119 mm (4.7”)
Weight 0.22 kg (0.49 lbs.) 0.157 kg (0.35 lbs.)
Environment and certification
RoHS compliance DIRECTIVE/2011/65/EU (EN 50581:2012)
WEEE compliance DIRECTIVE/2012/19/EU
¹ For detailed information on each module, please visit: freelancehardwareselector.automation.abb.com
Specific feature ¹ AI845 AI890 AI893 AI895
General info
Article number 3BSE023675R1 3BSC690071R1 3BSC690141R1 3BSC690086R1
Type Analog Input
Signal specification 0..20mA, 4..20 mA, 0..5 V, 1..5 V 0...20 mA RTD or TC 4...20 mA
Number of channels 8
Signal type Unipolar single ended Differential Unipolar single ended
HART Yes No Yes
SOE No
Redundancy Yes No
High integrity No
Intrinsic safety No Yes
Mechanics S800
Dimensions
Width 45 mm (1.77”)
Depth 102 mm (4.01”), 111 mm (4.37”) including connector
Height 119 mm (4.7”)
Weight 0.23 kg (0.51 lbs.) 0.2 kg (0.44 lbs.) 0.16 kg (0.35 lbs.) 0.2 kg (0.44 lbs.)
Environment and certification
RoHS compliance DIRECTIVE/2011/65/EU (EN 50581:2012)
WEEE compliance DIRECTIVE/2012/19/EU
¹ For detailed information on each module, please visit: freelancehardwareselector.automation.abb.com
Specific feature ¹ AO801 AO810V2 AO815 AO820
General info
Article number 3BSE020514R1 3BSE038415R1 3BSE052605R1 3BSE008546R1
Type Analog Output
Signal specification 0... 20 mA, 4...20 mA 0..20 mA, 4..20 mA 4..20 mA -20 mA...+20 mA, 0...20 mA, 4...20 mA, -10 V...+10 V, 0...10 V, 2...10 V
Number of channels 8 4
Signal type Unipolar single ended
HART No Yes No
SOE No
Redundancy No
High integrity No
Intrinsic safety No
Mechanics S800L S800
Dimensions
Width 86.1 mm (3.4”) 45 mm (1.77”)
Depth 58.5 mm (2.3”) 102 mm (4.01”), 111 mm (4.37”) including connector
Height 110 mm (4.33”) 119 mm (4.7”)
Weight 0.24 kg (0.53 lbs.) 0.18 kg (0.4 lbs.) 0.21 kg (0.46 lbs.) 0.18 kg (0.4 lbs.)
Environment and certification
RoHS compliance DIRECTIVE/2011/65/EU (EN 50581:2012)
WEEE compliance DIRECTIVE/2012/19/EU
¹ For detailed information on each module, please visit: freelancehardwareselector.automation.abb.com
Specific feature ¹ AO845A AO890 AO895 DI801
General info
Article number 3BSE045584R1 3BSC690072R1 3BSC690087R1 3BSE020508R1
Type Analog Output Digital Input
Signal specification 4..20 mA 0..20 mA, 4..20 mA 4...20 mA 24V d.c.
Number of channels 8 16
Signal type Unipolar single ended Current sinking
HART Yes No Yes No
SOE No
Redundancy Yes No
High integrity No
Intrinsic safety No Yes No
Mechanics S800 S800L
Dimensions
Width 45 mm (1.77”) 86.1 mm (3.4”)
Depth 102 mm (4.01”), 111 mm (4.37”) including connector 58.5 mm (2.3”)
Height 119 mm (4.7”) 110 mm (4.33”)
Weight 0.21 kg (0.46 lbs.) 0.2 kg (0.44 lbs.) 0.24 kg (0.53 lbs.)
Environment and certification
RoHS compliance DIRECTIVE/2011/65/EU (EN 50581:2012) DIRECTIVE/2011/65/EN (EN 50581:2012)
WEEE compliance DIRECTIVE/2012/19/EU
¹ For detailed information on each module, please visit: freelancehardwareselector.automation.abb.com
Specific feature ¹ DI802 DI803 DI810 DI811
General info
Article number 3BSE022360R1 3BSE022362R1 3BSE008508R1 3BSE008552R1
Type Digital Input
Signal specification 120 V a.c., 110 V d.c. 230 V a.c., 220 V d.c. 24 V d.c. 48 V d.c.
Number of channels 8 16
Signal type Current sinking
HART No
SOE No
Redundancy No
High integrity No
Intrinsic safety No
Mechanics S800L S800
Dimensions
Width 86.1 mm (3.4”) 45 mm (1.77”)
Depth 58.5 mm (2.3”) 102 mm (4.01”), 111 mm (4.37”) including connector
Height 110 mm (4.33”) 119 mm (4.7”)
Weight 0.24 kg (0.53 lbs.) 0.15 kg (0.33 lbs.)
Environment and certification
RoHS compliance DIRECTIVE/2011/65/EU (EN 50581:2012) DIRECTIVE/65/EU (EN 50581:2012) DIRECTIVE/2011/65/EU (EN 50581:2012)
WEEE compliance DIRECTIVE/2012/19/EU
¹ For detailed information on each module, please visit: freelancehardwareselector.automation.abb.com
Specific feature ¹ DI814 DI818 DI820 DI821
General info
Article number 3BUR001454R1 3BSE069052R1 3BSE008512R1 3BSE008550R1
Type Digital Input
Signal specification 24 V d.c. 120 V a.c. / 110 V d.c. 230 V a.c., 220 V d.c.
Number of channels 16 32 8
Signal type Current sourcing Current sinking
HART No
SOE No
Redundancy No
High integrity No
Intrinsic safety No
Mechanics S800
Dimensions
Width 45 mm (1.77”)
Depth 102 mm (4.01”), 111 mm (4.37”) including connector
Height 119 mm (4.7”)
Weight 0.15 kg (0.33 lbs.) 0.18 kg (0.4 lbs.)
Environment and certification
RoHS compliance DIRECTIVE/2011/65/EU (EN 50581:2012)
WEEE compliance DIRECTIVE/2012/19/EU
¹ For detailed information on each module, please visit: freelancehardwareselector.automation.abb.com
Specific feature ¹ DI828 DI890 DO801 DO802
General info
Article number 3BSE069054R1 3BSC690073R1 3BSE020510R1 3BSE022364R1
Type Digital Input Digital Output
Signal specification 120 V a.c. / d.c. NAMUR input level 24 V d.c. (12 - 32 V d.c.), 0.5 A 24...110 V d.c. / 250 V a.c. (max 2 A)
Number of channels 16 8 16 8
Signal type Current sinking Proximity sensor (NAMUR) or Voltage free contact Current sourcing, current limiting Relay (NO)
HART No
SOE No
Redundancy No
High integrity No
Intrinsic safety No Yes No
Mechanics S800 S800L
Dimensions
Width 45 mm (1.77”) 86.1 mm (3.4”)
Depth 102 mm (4.01”), 111 mm (4.37”) including connector 58.5 mm (2.3”)
Height 119 mm (4.7”) 110 mm (4.33”)
Weight 0.15 kg (0.33 lbs.) 0.2 kg (0.44 lbs.) 0.24 kg (0.53 lbs.)
Environment and certification
RoHS compliance DIRECTIVE/2011/65/EU (EN 50581:2012)
WEEE compliance DIRECTIVE/2012/19/EU
¹ For detailed information on each module, please visit: freelancehardwareselector.automation.abb.com
Specific feature ¹ DO810 DO814 DO815 DO818
General info
Article number 3BSE008510R1 3BUR001455R1 3BSE013258R1 3BSE069053R1
Type Digital Output
Signal specification 24V d.c. (12 - 32 V d.c.), 0.5 A 24 V d.c. (12-32 V d.c.), 0.5 A 24 V d.c. (10 - 32 V d.c.), 2A 24 V d.c. (12 - 32 V d.c.), 0.5 A
Number of channels 16 8 32
Signal type Current sourcing, current limiting Current sinking, current limiting High side driver, current limiting Current sourcing, current limiting
HART No
SOE No
Redundancy No
High integrity No
Intrinsic safety No
Mechanics S800
Dimensions
Width 45 mm (1.77”) 45 mm (1.77")
Depth 102 mm (4.01”), 111 mm (4.37”) including connector 102 mm (4.01"), 111 mm (4.37") including connector
Height 119 mm (4.7”) 119 mm (4.7")
Weight 0.18 kg (0.4 lbs.) 0.2 kg (0.44 lbs.) 0.18 kg (0.4 lbs.)
Environment and certification
RoHS compliance DIRECTIVE/2011/65/EU (EN 50581:2012) DIRECTIVE/2011/65/EN (EN 50581:2012)
WEEE compliance DIRECTIVE/2012/19/EU
¹ For detailed information on each module, please visit: freelancehardwareselector.automation.abb.com
Specific feature ¹ DO820 DO821 DO828 DO840
General info
Article number 3BSE008514R1 3BSE013250R1 3BSE069055R1 3BSE020838R1
Type Digital Output
Signal specification 230 V a.c. / d.c. (5 - 250 V a.c./d.c.), 3 A 230 V a.c./d.c. (5-250 V a.c./d.c.), 3 A 125 V d.c. / 250 V a.c., (5 - 125 V d.c. / 5 - 250 V a.c.), 2 A 24 V d.c. (19.2 - 32 V d.c.), 0.5 A
Number of channels 8 16
Signal type Relay (NO) Relay (NC) Relay (NO) Current sourcing, current limiting
HART No
SOE No
Redundancy No Yes
High integrity No
Intrinsic safety No
Mechanics S800
Dimensions
Width 45 mm (1.77”) 45 mm (1.77") 45 mm (1.77”)
Depth 102 mm (4.01”), 111 mm (4.37”) including connector 102 mm (4.01"), 111 mm (4.37") including connector 102 mm (4.01”), 111 mm (4.37”) including connector
Height 119 mm (4.7”) 119 mm (4.7") 119 mm (4.7”)
Weight 0.23 kg (0.5 lbs.) 0.18 kg (0.4 lbs.) 0.15 kg (0.33 lbs.)
Environment and certification
RoHS compliance DIRECTIVE/2011/65/EN (EN 50581:2012)
WEEE compliance DIRECTIVE/2012/19/EU
¹ For detailed information on each module, please visit: freelancehardwareselector.automation.abb.com
Specific feature ¹ DO890 DP820 DP840
General info
Article number 3BSC690074R1 3BSE013228R1 3BSE028926R1
Type Digital Output Pulse counter
Signal specification 11 V, 40 mA 24 V d.c. (12 - 32 V d.c.) 24 V d.c. (19.2 - 32 V d.c.)
Number of channels 4 2 8
Signal type Solenoid driver
HART No
SOE No
Redundancy No Yes
High integrity No
Intrinsic safety Yes No
Mechanics S800
Dimensions
Width 45 mm (1.77”)
Depth 102 mm (4.01”), 111 mm (4.37”) including connector
Height 119 mm (4.7”)
Weight 0.2 kg (0.44 lbs.) 0.15 kg (0.33 lbs.) 0.15 kg (0.33 lbs)
Environment and certification
RoHS compliance DIRECTIVE/2011/65/EN (EN 50581:2012) DIRECTIVE/2011/65/EU (EN 50581:2012)
WEEE compliance DIRECTIVE/2012/19/EU
¹ For detailed information on each module, please visit: freelancehardwareselector.automation.abb.com

Accessories
Specific feature ¹ TB805 TB806 TB807 TB845
General info
Article number 3BSE008534R1 3BSE008536R1 3BSE008538R1 3BSE021437R1
Mechanics S800
Dimensions
Width 22 mm 17 mm 43 mm
Depth 25 mm 13 mm 31.5 mm
Height 109 mm 19 mm 186 mm
Weight 46 g 10 g 180 g
Environment and certification
RoHS compliance Directive 2011/65/EU (EN 50581:2012)
WEEE compliance DIRECTIVE/2012/19/EU
¹ For detailed information on each module, please visit: freelancehardwareselector.automation.abb.com
Specific feature ¹ TB846 TK801V003 TK801V006 TK801V012
General info
Article number 3BSE021439R1 3BSC950089R1 3BSC950089R2 3BSC950089R3
Mechanics S800
Dimensions
Width 43 mm
Depth 31.5 mm
Height 186 mm
Weight 180 g 0,155 kg 0.19 kg 0.265 kg
Environment and certification
RoHS compliance DIRECTIVE/2011/65/EU (EN 50581:2012)
WEEE compliance DIRECTIVE/2012/19/EU
¹ For detailed information on each module, please visit: freelancehardwareselector.automation.abb.com
Specific feature ¹ TK811V015 TK811V050 TK811V150 TK812V015
General info
Article number 3BSC950107R1 3BSC950107R2 3BSC950107R3 3BSC950118R1
Dimensions
Weight 0.02 kg 0.045 kg 0.125 kg 0.015 kg
Environment and certification
¹ For detailed information on each module, please visit: freelancehardwareselector.automation.abb.com
Specific feature ¹ TK812V050 TK812V150 TY801K01 TY804K01
General info
Article number 3BSC950118R2 3BSC950118R3 3BSE023607R1 3BSE033670R1
Mechanics S800
Dimensions
Width 15.5 mm
Depth 62 mm
Height 11 mm
Weight 0.025 kg 0.065 kg 0.06 kg
Environment and certification
RoHS compliance Directive 2011/65/EU (EN 50581:2012) DIRECTIVE/2011/65/EU (EN 50581:2012)
WEEE compliance DIRECTIVE/2012/19/EU
¹ For detailed information on each module, please visit: freelancehardwareselector.automation.abb.com
Specific feature ¹ TY805K01 TY820K01
General info
Article number 3BSE081160R1 3BSE056980R1
Mechanics S800
Dimensions
Width 15.5 mm 20 mm
Depth 62 mm 8 mm
Height 11 mm 13 mm
Weight 0.06 kg 0.08 kg
Environment and certification
RoHS compliance Directive 2011/65/EU (EN 50581:2012)
WEEE compliance DIRECTIVE/2012/19/EU
¹ For detailed information on each module, please visit: freelancehardwareselector.automation.abb.com
IsFreelance

solutions.abb/freelance
solutions.abb/controlsystems

We reserve the right to make technical changes to the products or modify the contents of this document without prior notice. With regard to purchase orders, the agreed particulars shall prevail. ABB does not assume any responsibility for any errors or incomplete information in this document.

We reserve all rights to this document and the items and images it contains. The reproduction, disclosure to third parties or the use of the content of this document – including parts thereof – are prohibited without ABB’s prior written permission.

Copyright© 2024 ABB All rights reserved